57
Chapter 2: Installation
Manufacturing Mode
Close pins 2-3 of jumper JPME2 to by-pass SPI flash security and force the system to operate
in Manufacturing Mode, allowing you to flash the system firmware from a host server for
system setting modifications. Refer to the table below for jumper settings.
Manufacturing Mode
Jumpers Settings
Jumper Setting
Definition
Pins 1-2
Normal (Default)
Pins 2-3
Manufacture Mode
Watch Dog
Watch Dog (JWD1) is a system monitor that can reboot the system when a software application
hangs. Close pins 1-2 to reset the system if an application hangs. Close pins 2-3 to generate
a non-maskable interrupt signal for the application that hangs. Refer to the table below for
jumper settings.
Watch Dog
Jumpers Settings
Jumper Setting
Definition
Pins 1-2
Reset (default)
Pins 2-3
NMI
Open
Disabled
1. Manufacturing Mode
2. Watch Dog
BIOS
LICENSE
MAC CODE
IPMI CODE
BAR CODE
C9X299-PGF-L
REV
:1.01
+
1
+
PCIE M.2 M-2
PCIE M.2-M1
U.2-1
U.2-2
CLEAR CMOS
I-SATA5
I-SATA4
I-SATA3
USB 4/5(3.0)
USB 2/3
USB 0/1
PCH SLOT2 PCI-E 3.0 X1
USB 10/1
1(3.0)
CPU SLOT1 PCI-E 3.0 X8 (IN X16)
CPU SLOT7 PCI-E 3.0 X16
CPU SLOT3 PCI-E 3.0 X8 (IN X16)
CPU SLOT5 PCI-E 3.0 X8 (IN X16)
I-SATA2
I-SATA0
I-SATA1
DIMMA1
DIMMB2
DIMMB1
DIMMA2
HD AUDIO
USB 8/9 (3.1)
LAN1
USB 6/7(3.1)
DIMMD2
DIMMD1
DIMMC2
DIMMC1
KB/Mouse
CLOSE 1st
OPEN 1st
JF1
LGA2066
VGA
LED1
JRK1
SP1
JTPM1
JPI2C1
JL1
JP
AC1
JWD1
JPG1
JPME2
CPU_FAN1
CPU_FAN2
SYS_FAN2
SYS_FAN3
SYS_FAN1
JBT1
JSD1
JLED1
JIPMB1
JSTBY1
MH15
MH12
MH14
JD1
J3701
LED6903
LED6904
LED7201
B2
JPW1
JPW2
JCOM1
PCH
RESET
POWER
JPB1
JPW3
BMC
2
1
