Chapter 4: UEFI BIOS
107
CPU SLOT3/SLOT5 Select
This feature selects between a combination of SLOT3/SLOT5 configuration or only SLOT5.
The options are
CPU SLOT3 X8 SLOT5 X8
and CPU SLOT5 X16.
Onboard LAN1 Support
This feature enables or disables onboard LAN1. The options are
Enabled
and Disabled.
Onboard LAN Option ROM Type
Use this feature to select which type of firmware to be loaded for the onboard LAN port.
The options are
Legacy
and UEFI.
Onboard LAN1 Option ROM
Select Preboot Execution Environment (PXE) to boot the computer using a PXE device
installed in a LAN port specified. Select Disabled to prevent system boot using a device
installed in a LAN port. The options are
Disabled
and PXE.
Note:
This feature is available when the
is set to Enabled.
Network Stack
Select Enabled to enable Preboot Execution Environment (PXE) or Unified Extensible
Firmware Interface (UEFI) for network stack support. The options are
Enabled
and Disabled.
*If the feature above is set to Enabled, the following features will become available
for configuration:
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. If this feature is disabled, it will not create
the IPv4 PXE boot option. The options are Disabled
and
Enabled
.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. If this feature is disabled, it will not
create the IPv4 HTTP boot option. The options are
Disabled
and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. If this feature is disabled, it will not create
the IPv6 PXE boot option. The options are Disabled
and
Enabled
.
IPv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. If this feature is disabled, it will not create
the IPv6 HTTP boot option. The options are
Disabled
and Enabled.
PXE boot wait time
Use this feature to set the wait time (in seconds) upon which the system BIOS will wait for
user to press the <ESC> key to abort PXE boot instead of proceeding with PXE boot by
connecting to a network server immediately. The default setting is
0
.
