Supermicro B11SRE-CPU-TF, Руководство пользователя

Страница: 25 / 101

25
Chapter 2: Installation
SAN CODE
C
A
+
B11SRE-CPU-TF
REV:1.00
MAC CODE
BIOS
LICENSE
IPMI CODE
BAR CODE
PRESS FIT PRESS FIT
DESIGNED IN USA
I-SATA3
BMC_HB_LED1
JSD1
JBT1
BT1
JRK1
JTPM1
J4
JKVM1
J1
JWD1
JBR1 JPME2
J3
JPG1
JP1
JP2 PWR1
JTAG1
1
1
JSIOM1
DIMMB2 DIMMB1 DIMMA2 DIMMA1
CPU
DIMMC1 DIMMC2 DIMMD2 DIMMD1
Release Tabs
Notches
Press both notches
straight down into
the memory slot.
DIMM Installation
1. Insert the desired number of DIMM
modules into the memory slots based on
the recommended DIMM population table
on page 24.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.