Supermicro AOC-USAS2LP-H8iR, Руководство пользователя

Страница: 18 / 20

AOC-USAS2LP-H8iR Add-on Card User’s Manual
2-8
Flashing Firmware Using the MegaCLI under DOS
Use the procedure below to flash firmware using the MegaCLI application under DOS.
Flashing Firmware Using the MegaCLI under DOS
1. Boot from USB key and use command
Megacli -adpFwFlash -f
AF2108_FW_Image.rom -a0
( Figure 2-10 ).
2. Next update the controller NVData with Megacli -adpFwFlash -f smc2108.rom -a0
(
Figure 2-11 ).
3. Reboot the system and check the firmware version in the controller banner during
boot-up and using the MegaRAID Storage Manager application in Windows (see
step 8 and step 9 in the Flashing Firmware Using MegaRAID Storage Manager
procedure).
2-5 MegaRAID Storage Manager
For information, installation and use of the LSI MegaRAID Storage Manager Windows
application and MegaCLI Command Line Interface application download the
MegaRAID
SAS Software_Rev_I_UG.pdf file from: http://www.supermicro.com/support/manuals/
on the SuperMicro website.
Figure 2-10. Flashing Firmware Using the Megacli Command
Figure 2-11. Updating the Controller NVData