Supermicro AOC-USAS2LP-H8iR, Руководство пользователя

Страница: 11 / 20

2-1
Chapter 2
Connectors, Jumpers and Indicators
2-1 Front Connectors and Pin Definitions
Connectors are used to attach the add-on card to the system’s mainboard.
Table 2-1 lists the add-on card’s front connectors.
Internal SAS Connectors
The Internal SAS ports (SFF-8087 connector) connect to the backplane allowing the
motherboard to access the hard drives and RAID capabilities. Each of these two
connectors supports up to four hard drives allowing the add-on card to support a
maximum of eight. (SAS 0-3 and SAS 4-7). This card supports SAS, SATA1, and SATA2
drives.
Use a single port SAS “ipass” cable (SuperMicro order number CBL-0108L-02) to
connect this port to your system.
Board-to-Board Connector
This 20-Pin connector interfaces with the Battery Backup Unit (BBU). The BBU is an
optional accessory and is not included with this card.
Figure 2-1. AOC-USAS2LP-H8iR Add-on Card Front Connectors and Jumpers
Table 2-1. Front Connectors and Pin Definitions
Number Description
1 Internal SAS Connectors
2 UIO Board-to-Board Connector
1
2
1