3-2
AOC-SLG3-2M2 Expansion Card User's Guide
3-2 Installing Expansion Cards
The AOC-SLG3-2M2 supports two M.2 SSDs in 60 mm, 80 mm, or 110 mm length.
Visit the Supermicro website for a current list of supported M.2 SSDs.
Installing Expansion Cards
1. Power down the system and remove the power cord from the rear of the
power supply.
2.
Use industry-standard anti-static equipment (such as gloves or wrist strap)
and follow the precautions on page 3-1 to avoid damage caused by ESD.
3. For each SSD, install the standoff in the appropriate hole that corresponds
with the form factor of the SSD to be installed (60 mm, 80mm, or 110 mm
length SSDs are supported). Push the plastic standoff until it snaps into the
carrier card.
Inserting a M.2 SSD into an Expansion Card Slot
4. Insert one or two M.2 SSDs into the slots on the expansion card. Then push it
flat against the carrier card and the plastic standoff.
