3-7
Chapter 3: Installation
3-5 Installing Linux Drivers (for Intel
®
Fortville-25 XXV710)
Follow the steps below to install the driver to a Linux system.
1. Build a binary RPM package by running this command:
rpmbuild -tb <filename.tar.gz>
2. Be sure to replace
<filename.tar.gz>
in the above step (#1) with the spe-
cific filename of the driver.
Note:
For the build to work properly, the current running kernel
must
match the version and configuration of the kernel sources that are already
installed in your system. If you have just recompiled the kernel, reboot the
system at this time.
3.
Move the base driver tar file to the directory of your choice. For example:
/home/username/i40e
or
/usr/local/src/i40e
4. Untar/unzip archive, where
<x.x.x>
is the version number for the driver tar
file:
tar zxf i40e-x.x.x.tar.gz
5. Change to the driver src directory, where
<x.x.x>
is the version number for
the driver tar:
cd i40e-x.x.x/src/
6. Compile the driver module:
make install
Install the binary as:
/usr/local/src/i40e
7. Load the module. For kernel 2.6.x, use the modprobe command:
modprobe i40e <parameter>=<value>
For 2.6 kernels, the
‘insmod’
command can be used if the full path to the driver
module is specified. For example:
Содержание AOC-M25G-i2S
Страница 1: ...User s Guide Revision 1 0a AOC M25G i2S AOC M25G i2SM...
Страница 5: ...v Preface...
