Super A2SAN-LN4-E/-C User's Manual
76
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is
1
.
Intel
®
I211 Gigabit Network Connection - 3C:EC:EF:87:BE:B0
Intel
®
I211 Gigabit Network Connection - 3C:EC:EF:87:BE:B1
Intel
®
I211 Gigabit Network Connection - 3C:EC:EF:87:BE:B2
Intel
®
I211 Gigabit Network Connection - 3C:EC:EF:87:BE:B3
NIC Configuration
Link Speed
This feature allows you to specify the port speed used for the selected boot protocol. The
options are
Auto Negotiated
, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps
Full.
Wake On LAN
Select Enabled for Wake On LAN support, which will allow the system to wake up when
an onboard device receives an incoming signal. The options are Disabled and
Enabled
.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. Use the
keyboard to select a value.
UEFI Driver
This feature displays the UEFI driver version.
Adapter PBA
This feature displays the Processor Bus Adapter (PBA) model number. The PBA number is
a nine digit number (i.e., 010B00-000) located near the serial number.
Device Name
This feature displays the adapter device name.
Chip Type
This feature displays the network adapter chipset name.
PCI Device ID
This feature displays the device ID number.
PCI Address
This feature displays the PCI address for this computer. PCI addresses are three two-digit
hexadecimal numbers.
