16
Super A2SAN-LN4-E/-C User's Manual
Note:
Table is continued on the next page.
Quick Reference Table
Jumper
Description
Default Setting (*)
JPME2
Manufacturing Mode
Pins 1-3: ME Manufacturing Mode
Pins 3-5: Normal* (Default)
JPME2
Power Force On
Pins 2-4: Power Force On*
Pins 4-6: PWR BTN Power On
JSIM_OPT1
SIM Card Detection
Pins 1-2 (JSIM1)
Pins 3-4 (JSIM2)
Pins 5-6 (JSIM3)
Open: High Active
Closed: Low Active* (Default)
LED
Description
Status
LED1
Power Good LED
Solid Green: All Power Good
Solid Red: Power Fail
LED2
M.2 Active LED (for JMD1)
Activity Behavior: Depends on Module
LED3
M.2 Active LED (for JMD2)
Activity Behavior: Depends on Module
LED4
M.2 Active LED (for JMD3)
Activity Behavior: Depends on Module
LED5
M.2 Active LED (for JMD4)
Activity Behavior: Depends on Module
LED6
GbE LAN Active LED (for JLAN1)
Blinking Amber: LAN Active
LED7
GbE LAN Active LED (for JLAN2)
Blinking Amber: LAN Active
LED8
GbE LAN Active LED (for JLAN3)
Blinking Amber: LAN Active
LED9
GbE LAN Active LED (for JLAN4)
Blinking Amber: LAN Active
Connector
Description
BT1
Battery Connector
(To clear the CMOS, remove the battery and power input, short pins 1-2 for more than 10
seconds and install the battery.)
COM1
Serial COM Port (supports RS-232 x 1)
FAN1
System Fan Header
I-SATA0
Intel PCH SATA 3.0 Port
J2
USB 2.0 Header
J5
SO-DIMM Slot (bottom side layout)
JD1
Speaker Header (Pins 1-4)
JF1
Front Control Panel Header
JGP1
8-bit General Purpose I/O Header
JHDMI1
Back Panel HDMI Port
JLAN1 - JLAN4
LAN1 - LAN4 (RJ45) Ports
JMD1
M.2 B-Key 2242/3042 Slot (supports USB2.0/3.0 with Nano SIM for LTE/3G)
(supports SATA upon request)
JMD2, JMD3
M.2 B-Key 2242/3042 Slots (supports USB2.0/3.0 with Nano SIM for LTE/3G)
JMD4
M.2 E-Key 2230 Slot (supports PCIe x1/USB2.0 with WiFi + BT)
JMD2_SRW1
M.2 Mounting Screw for JMD2 (bottom side layout)
