Supermicro 7043P-8R, Руководство пользователя

Страница: 3 / 108

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the SuperServer
7043P-8R. Installation and maintainance should be performed by experi-
enced technicians only.
The SuperServer 7043P-8R is a high-end, dual processor 4U tower/
rackmount server based on the SC942S-600 4U rackmount server chassis
and the X5DP8-G2, a dual processor serverboard that supports single or
dual Intel Xeon
®
processors up to 3.06 GHz at a Front Side (System) Bus
speed of 533/400 MHz and up to 16 GB DDR-266 (PC2100) SDRAM main
memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER X5DP8-G2
serverboard and the SC942S-600 chassis, which comprise the SuperServer
7043P-8R.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
7043P-8R into a rack and check out the server configuration prior to pow-
ering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections
of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.