Supermicro 656531, Руководство пользователя

Страница: 77 / 116

Chapter 6: BIOS
77
6.5 IPMI
Use this feature to configure Intelligent Platform Management Interface (IPMI) settings.
BMC Firmware Revision
This feature indicates the IPMI firmware revision used in your system.
IPMI Status
This feature indicates the status of the IPMI firmware installed in your system.

System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Disabled and
Enabled .
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No
to keep all system event logs after each system reboot. The options are
No,
Yes, On next
reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event
log is full. The options are
Do Nothing and Erase Immediately.
Note : After making changes on a setting, be sure to reboot the system for the changes
to take effect.

BMC Network Configuration
The following items will be displayed:
IPMI LAN Selection
This item displays the IPMI LAN setting. The default setting is Failover .
IPMI Network Link Status
This item displays the IPMI Network Link status. The default setting is Dedicated LAN .