Supermicro 656531, Руководство пользователя

Страница: 22 / 116

22
Chapter 3: Component Installation and Maintenance
DIMM Installation
Begin by removing power from the system as described in Section 3.1 and removing the
cover as described in Section 3.2.
1. Insert DIMM modules in the following order: DIMMA1, DIMMB1, DIMMA2, DIMMB2. For
the system to work properly, use memory modules of the same type and speed.
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory slot.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Seat the module firmly into the slot, pushing down with your thumbs evenly on both
sides of the module until it snaps into place.
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM modules from the motherboard.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.
Figure 3-3. Installing DIMMs
Note: Visit the product page on the Supermicro website for possible updates to memory
support ( www.supermicro.com ).