manualshive.com logo in svg

Supermicro 6048R-DE2CR24L, Руководство пользователя

Поделиться
Скачать
Supermicro 6048R-DE2CR24L Скачать руководство пользователя страница 95

Chapter 7: BIOS

7-17

XHCI Hand-Off

This is a work-around solution for operating systems that do not support XHCI 

(Extensible Host Controller Interface) hand-off. The XHCI ownership change should 

be claimed by the XHCI driver. The settings are 

Enabled

 and Disabled.

EHCI Hand-Off

This item is for operating systems that do not support Enhanced Host Controller 

Interface (EHCI) hand-off. When this feature is enabled, EHCI ownership change 

will be claimed by the EHCI driver. The settings are Enabled and 

Disabled

.

Port 60/64 Emulation

Select Enabled to support I/O port 60h/64h emulation, which will provide complete 

legacy USB keyboard support for the operating systems that do not support legacy 

USB devices. The options are Disabled and 

Enabled

.

USB 3.0 Support

Select Enabled for USB 3.0 support. The options are Smart Auto, 

Auto

, Enabled,  

and Disabled.

EHCI1

Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on 

USB 2.0 connector #1 (-at least one USB 2.0 connector should be enabled for EHCI   

support.) The options are Disabled and 

Enabled

.

EHCI2

Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on 

USB 2.0 connector #2 (-at least one USB 2.0 connector should be enabled for EHCI   

support.) The options are Disabled and 

Enabled

.

XHCI Pre-Boot Drive

Select Enabled to enable XHCI (Extensible Host Controller Interface) support on a 

pre-boot drive specifi ed by the user. The options are

 Enabled

 and Disabled.

Содержание 6048R-DE2CR24L































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды