Supermicro 6048R-DE2CR24L, Руководство пользователя

Страница: 62 / 126

5-16
SUPERSTORESYSTEM 6048R-DE2CR24L User's Manual
5-9 Onboard Indicators
10Gbps LAN1/2 Link LED
(Connection Speed Indicator)
LED Color Defi nition
Off No Connection, 10 Mb/s or 10 Mb/s
Amber 1 Gb/s
Green 10 Gb/s
BMC Enable
Close pins 1/2 of jumper JPB1 to
enable the ASpeed AST 2400 BMC
(Baseboard Management Controller)
to provide IPMI 2.0/KVM support on
the motherboard. Please install an
SMCI-proprietary cable (CBL-218L)
on the connector JKVM1 on the I/O
backplane for KVM support. See the
table on the right for jumper settings.
BMC Enable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 BMC Enable (Default)
Pins 2-3 Disabled
LAN LEDs
The Ethernet ports (located on the
I/O backplane) have two LEDs. On
each port: the orange LED fl ashes to
indicate activity while the other LED
may be green, amber or off to indicate
the speed of the connection. Please
note that LAN1 also functions as an
IPMI LAN. See the table on the right
for the functions associated with the
connection speed LED.
Activity LED Link LED
LAN
BMC Heartbeat/System
Heartbeat LED Status
State Defi nition
Green Blinking BMC Normal
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEDH, the upper LED on I/O back
panel. When LEDH is blinking, the
BMC is functioning normally. See the
table at right for more information.
(PCH) HDD LED
The (PCH) HDD LED is located at
HDD LED1 on the motherboard. When
this LED is blinking, HDD supported by
the Intel PCH is active. See the table
at right for more information.
(PCH) HDD Activity LED
LED Status
State Defi nition
Green: Blinking PCH HDD: Active