Supermicro 6027TR-H70FRF, Руководство пользователя, Страница: 74 / 134

5-22
SUPERSERVER 6027TR-H70QRF/H70FRF/H70RF USER'S MANUAL
Watch Dog Enable/Disable
Watch Dog (JWD1) is a system monitor
that can reboot the system when a
software application hangs. Close Pins
1-2 to reset the system if an application
hangs. Close Pins 2-3 to generate
non-maskable interrupt signals for the
application that hangs. See the table
on the right for jumper settings. Watch
Dog must also be enabled in the BIOS.
Watch Dog (JWD1)
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Reset (default)
Pins 2-3 NMI
Open Disabled
VGA Enable (JPG1)
Jumper Settings
Jumper Setting Defi nition
1-2 Enabled (Default)
2-3 Disabled
BMC Enable (JPB1)
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 BMC Enable (Default)
Pins 2-3 Normal
Infi niBand Enable (JIB1)
Jumper Settings
Jumper Setting Defi nition
1-2 Enabled (Default)
2-3 Disabled
GLAN Enable/Disable
JPL1 enables or disables the GLAN
1/2 ports on the motherboard. See the
table on the right for jumper settings.
The default setting is Enabled.
GLAN Enable
Jumper Settings
Jumper Setting Defi nition
1-2 Enabled (default)
2-3 Disabled
VGA Enable
Jumper JPG1 allows the user to
enable the onboard VGA connectors.
The default setting is 1-2 to enable the
connection. See the table on the right
for jumper settings.
BMC Enable
Jumper JPB1 allows you to enable
t h e o n b o a r d B M C ( B a s e b o a r d
Management) Controller to provide
I P M I 2 . O / K V M s u p p o r t o n t h e
motherboard. See the table on the
right for jumper settings.
Infi niBand (IB) Enable
B o t h t h e X 9 D R T- H I B Q F a n d
X9DRT-HIBFF serverboards have
Jumper JIB1, which allows you
to enable the onboard InfiniBand
connector. The default setting is 1-2 to
enable the connection. See the table
on the right for jumper settings.