Supermicro 5130DB-IL, Руководство пользователя

Страница: 30 / 109

30
Desktop 5130DB-IL User's Manual
Note: Be sure to use memory modules of the same type, same speed, same frequency on the
same motherboard. Mixing of memory modules of different types and speeds is not allowed.
Due to memory allocation to system devices, the amount of memory that remains available
for operational use will be reduced when 4 GB of RAM is used. The reduction in memory
availability is disproportional. See the following table for details.
Possible System Memory Allocation & Availability
System Device Size
Physical Memory Remaining/Available
(4 GB Total System Memory)
Firmware hub flash memory (System BIOS) 1 MB 3.99
Local APIC 4 KB 3.99
Area reserved for the chipset 2 MB 3.99
I/O APIC (4 KB) 4 KB 3.99
PCI Enumeration Area 1 256 MB 3.76
PCI Express (256 MB) 256 MB 3.51
PCI Enumeration Area 2 (if needed) Aligned on
256MB boundary
512 MB 3.01
VGA memory 16 MB 2.85
TSEG 1 MB 2.84
Memory available to OS and other applications 2.84
Memory Population Guidelines
When installing DIMMs, the memory slots should be populated in the following order: DIMMA2
and DIMMB2, then DIMMA1, DIMMB1.
Always use DDR4 modules of the same size, type and speed.
Mixed DIMM speeds can be installed, however, all DIMMs will run at the speed of the slowest
DIMM.
Recommended Population (Balanced)
DIMMB2 DIMMA2 DIMMB1 DIMMA1
Total System
Memory
4GB 4GB 8GB
4GB 4GB 4GB 4GB 16GB
8GB 8GB 16GB
8GB 8GB 8GB 8GB 32GB
16GB 16GB 32GB
16GB 16GB 16GB 16GB 64GB