Supermicro 1027R-73DAF, Руководство пользователя

Страница: 86 / 124

6-8
S
UPER
S
ERVER 1027R-73DAF Manual
6-5 Power Supply
The SuperServer 1027R-73DAF has a single 560W power supply.
If the power supply module fails, the system will shut down and you will need to
replace the module. Replacements can be ordered directly from Supermicro (see
contact information in the Preface).
As there is only one power supply module in the system, power must be com-
pletely removed from the server before removing and replacing the power supply
for whatever reason.
Replacing the Power Supply (Figure 6-6)
1. Power down the server and unplug the AC power cord.
2. Remove the two screws located on the side of the power supply bay and set
them aside for later use.
3. Gently slide the power supply out the back of the chassis.
4. Replace the failed power module with another of the same model.
5. Slide the new power supply module into the power supply bay.
6. Align the holes on the side of the power supply with the holes in the side of
the power supply bay. Secure the power supply by replacing the previously
removed screws.
7. Plug the AC power cord into the back of the module and power-up the server.
Figure 6-6. Removing/Replacing the Power Supply