Supermicro 1027R-73DAF Скачать руководство пользователя

Страница: 108 / 124

7-22

UPER

ERVER 1027R-73DAF User's Manual

Pending Operation

Use this item to schedule an operation for the security device. The options are

None

, Enable Take Ownership, Disable Take Ownership, and TPM Clear.

Note:

During restart, the computer will reboot in order to execute the pend-

ing operation and change the state of the security device.

Current Status Information:

This item displays the information regarding the

current TPM status.

TPM Enable Status

This item displays the status of TPM Support to indicate if TPM is currently

enabled or disabled.

TPM Active Status

This item displays the status of TPM Support to indicate if TPM is currently ac-

tive or deactivated.

TPM Owner Status

This item displays the status of TPM Ownership.

Intel TXT (LT-SX) Confi guration

Intel TXT (LT-SX) Hardware Support

This feature indicates if the following hardware components support the Intel

Trusted Execution Technology.

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Confi guration

This feature displays the following TXT confi guration setting.

TXT (LT-SX) Support:

This item indicates if the Intel TXT support is enabled

or disabled. The default setting is

Disabled

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted

Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

Содержание 1027R-73DAF





























































































































Результаты поиска

Содержание 1027R-73DAF

Отзывы:

Похожие инструкции для 1027R-73DAF

Бренды по названию

Популярные бренды

Supermicro 1027R-73DAF, Руководство пользователя

Результаты поиска

Содержание 1027R-73DAF

Отзывы:

Похожие инструкции для 1027R-73DAF

Бренды по названию

Популярные бренды