Supermicro 1020A-T, Руководство пользователя

Страница: 14 / 100

A+ Server 1020A-T User's Manual
1-4
1-3 Server Chassis Features
The -500 is our third-generation 1U chassis and features four hot-swap
Serial ATA drive bays, a slim CD-ROM drive, a slim 3.5" fl oppy drive and a revo-
lutionary cooling design that can keep today's most powerful processors running
well below their temperature thresholds. The following is a general outline of the
main features of the -500 chassis.
System Power
The -500 chassis includes a single 500W cold-swap power supply.
Serial ATA Subsystem
For the 1020A-T, the -500 chassis was designed to support four Serial
ATA hard drives, which are hot-swappable units. RAID 0 and RAID 1 levels are
supported.
Note: The system's operating system must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Control Panel
The control panel provides important system monitoring and control information.
LEDs indicate power on, network activity, hard disk drive activity and system over-
heat conditions. Also present are main power and system reset buttons.
I/O Backplane
The -500 is a 1U rackmount chassis. Its I/O backplane provides one
full-height, half-length and one low profi le slot for PCI add-on cards, one COM port
(the other is internal), one VGA port, two USB ports, PS/2 mouse and keyboard
ports and two Ethernet (LAN) ports. (See Figure 1-2.)