Superlift SSLG-2 800DC, Руководство пользователя

Страница: 14 / 19

1
Clockwise rotation to increase, counter-clockwise rotation to reduce. The total time can be set to 10
seconds as minimum and 90 seconds as maximum. For example, if gate moves 20 seconds,
please try to add 5 seconds, namely setting 25 seconds is suitable.
VR3: For motor auto-reverse force adjustment when meeting obstacle.
Clockwise rotation to increase the reverse force, counter-clockwise rotation to reduce.
DIP switch adjustment
serial number
1 1 ON 2 OFF: automatic close delay time is 3s.
1 OFF 2 ON: automatic close delay time is 10s.
1 ON 2 ON: automatic close delay time is 30s.
1 OFF 2 OFF: cancel automatic close function.
2
3 ON - Remote control is three button mode, the first button is OPEN, the
second button is CLOSE, the third button is STOP.
OFF- Remote control is single button mode, one same button on the remote
control to circularly control OPEN/STOP/CLOSE/STOP.
4 OFF - External button switch is single button mode, connect to 1 and 4 of J7.
ON - External button switch is three button mode.
5
Left and Right installation setting.
OFF - Right side mounting
ON - Left side mounting
The change of door close direction will be valid only after the re-power.
6 Limit switch setting.
ON - Normal open (N.O.);
OFF - Normal close (N.C.).
7 Meet obstacle reversal function.
ON - enabled;
OFF - disabled.
8 Infrared detection delay when closing
ON - infrared detection delay is 1 second;
OFF - infrared detection delay function is disabled.
Infrared connection
Infrared photocell function: In the closing process, when infrared ray of the photocell is covered by
people or objects during its detection range, the gate will open immediately for security protection.
The distance between photocell receiver and photocell emitter should be more than 2 meters,
otherwise will affect the induction of the photocell.
If connect the infrared sensor, please remove the short connection between 5 and 6 on the J1
terminal.