1. Predrill
1/8" dia. hole
through
Vinyl Beam and Aluminum Channel
and 1½" into Beam Mount.
2. Predrill
1/4" dia. hole
through
Vinyl Beam and Aluminum
Channel.
3. Predrill
5/8" dia. hole
through
outside wall of Vinyl Beam only.
Insert Beam Mount Bolt
Beam Mount
Vinyl Beam
Aluminum
Channel
Plug screw holes
with 5/8" Plug
10
11
Orient the beam
so the indent in
the channel is
facing away from
the beam mount
and the stringer
brackets are up.
Attach Beams
Remove Beam Mount cap,
then fasten bolt through beam
mount and re-attach cap.
Correct Channel Orientation
Edge of the beam mount should be 6" from the end of the beams.
6"
SuperiorPlasticProducts.com
