28
" C
onc
re
te
2" Dirt
Ad
ju
st
H
ei
gh
t
&
L
eve
l
ALT
Place Concrete Column Mount
Note:
We recommend a 4'' x 4'' x 54'' Pressure treated
wood Post should be used for the following steps.
Dig 9" diameter holes at each marked position. A
proper depth should allow the bottom of the hole to
fall beneath the frost line (
recommended 30"
). Bell
out bottom of holes to help prevent frost uplift.
To ensure proper Post depth Fill the hole with
approximately half the recommended concrete, then
place the Post. Measure height of Post, and adjust
to correctness (Recommended 24'' above ground).
Check and adjust level. Fill remaining space around
the Post with concrete until approximately 2" remains.
Move on to the next Post, and repeat process.
Once all Posts have been installed, double check each
Post for correct level and height. Adjust as necessary.
Note:
Concrete must be allowed to fully cure
prior to installing fencing sections. (
Refer to
manufacturer recommendations
)
Wait to fully
Cure
Fasten Concrete Column Mount
ALT
Fasten the outward facing sides first; which should then butt up against the
4'' x 4'' Post in the corner.
Stagger screws so that they are not aligned with one another, thus covering
more surface area of the Column.
SuperiorPlasticProducts.com
Use #14 x 2''
Wood Screws
(
not provided
)
