NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE.
10
ACCESSORIES AND COMPONENTS
Brass
AC-SPB
Adjustable Canopy
Black
AC-BK
40HTK-SPB
Horizontal Trim Kits
45HTK-SPB
Forced Air Kit
(Includes Variable
Speed Wall Switch)
FAB-1600
Grounded
to Appliance
Blower Motor
Motor Plug
Receptacle
120V
Appliance Junction Box
NOTE: If any of the original wire as supplied
must be replaced, it must be replaced with type
AWM 105
°
c – 18Ga. wire
Figure 18
Trim Kits
The UVFCE fireboxes can be enhanced with
stylish trim kits, Models 40 HTK-SPB and
45HTK-SPB. Refer to the installation instruc-
tions provided with the trim kits for installation
details.
Forced Air Kit
If you are installing the forced air kit, Model
FAB-1600, see the installation instructions pro-
vided with the kit for electrical wiring require-
ments (
Figure 18 ). The firebox must be con-
nected to main power supply at time of instal-
lation if a forced air kit is to be installed later.
The electrical connections must be made be-
fore the firebox is framed and enclosed in the
finished walls.
This appliance must be electrically grounded in
accordance with local codes or, in the absence
of local codes, the national electrical code,
ANSI/NFPA 70 - (Latest Edition).
CAUTION: ELECTRICAL CONNECTIONS
SHOULD ONLY BE PERFORMED BY A QUALI-
FIED, LICENSED ELECTRICIAN. MAIN POWER
MUST BE OFF WHEN CONNECTING TO MAIN
ELECTRICAL POWER SUPPLY OR PERFORM-
ING SERVICE.
FIREBOX FINISHES
There are a wide variety of “finished looks” for
your UVFCE built-in unvented fireboxes from
formal wall decor with elaborate mantels to
rustic wood paneling or warm brick facings.
Only noncombustible materials like marble,
stone, tile, brick, etc. may overlap the black
front facing but be sure not to block the upper
or lower grilles. Seal all joints between the
black facing and wall surrounds to prevent air
intrusion. Use noncombustible caulking mate-
rial only to seal the black metal facing to the
surround material on the finished wall.
REPLACEMENT PARTS
An exploded view of the firebox with num-
bered parts and a replacement parts list can be
found on page 11. Normally, all parts should
be ordered through your distributor or dealer.
Parts will be shipped at prevailing prices at
time of order.
When ordering repair parts, always give the
following information:
1. The model number of the firebox.
2. The serial number of the firebox.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the firebox.
If you encounter any problems or have any
questions concerning the installation of a un-
vented heater in this system, please contact
your distributor. For the name of your nearest
distributor contact:
Lennox Hearth Products
1110 West Taft Avenue
Orange, California 92865
