MVP-300_20210713_REV_A
Turning MagVibe
™ Pro
On / Off (RF - Remote control Mode)
There are two ways to turn the MagVibe
™
Pro on and off. The first method is to use the pre-
programmed RF remote control (
Optional
) and the second is to manually control the MagVibe utilizing
the membrane switch. The following will walk through the controls.
To use the RF remote control, slide the
protective button cover downward to expose
the buttons. There are two buttons: Button
A turns the MagVibe
™
Pro on and off, and
Button B is an auxiliary RF control for
powered accessories from
Isoplam srl
.
To turn the MagVibe
™
Pro on and off with the remote: Press
the power button on the membrane switch to wake the
MagVibe.
When the MagVibe is ready both the blue LED located in the
remote-control icon and the green LED located in low vibration
mode will light. The MagVibe is now ready to receive RF
remote signals.
To turn on, simply press button A and the
vibration will start. When you want to
turn it off, press button A again.
