MVP-300_20210713_REV_A
ProFloat™
© Attachment
Decide which direction you want to
mount the
ProFloat™
. We recommend
that the cutting edge be facing the
operator when cutting high spots and
filling low spots. Once this is done the
ProFloat™
can be quickly rotated 180° to
open the concrete on the way out, and
seal on the way back.
Loosen both QAS
™
knobs by turning
them counter-clockwise.
Align the QAS™ receptacle with the QAS™ dovetail and slide over to engage.
Center the MagVibe
Pro™
over the
QAS
™
dovetail and tighten both
QAS
™ knobs
by turning them
clockwise. DO NOT OVERTIGHTEN.
Opens Concrete
Seals Concrete
