21
S
uperior
B
roadcast
P
roducts
Blue Digital Exciter
User Manual
17 / 44
User Manual
Rev. 1.0 - 20/11/09
DTVC
No-Linear
Linear
Ï
Figure 6.21
Selecting no-linear precorrection you can modify the following parameter:
Select Table :
Î
Default
Esc Ok
Figure 6.22
Select Table
This menu provides to select between thirty non-linear pre-distortion
tables previously set in a java graphical ambient and downloaded to
the machine via USB port. The linear pre-correction of group delay
is unique and it is also previously set in a java graphical ambient.
The selection can be automated in relation to the power output, if
required. Only one linear and six non-linear table will be available
initially.
Selecting linear precorrection you can modify the following parameter:
Equalization :
Î
On
Esc Ok
Figure 6.23
Equalization
This menu provides to select between ON or OFF.
6.2.14.1 Pre-correction guide on JAVA graphical ambient
The Java Virtual Interface has been created to permit the user, in a simple and intuitive
way, to monitor the measures and the status of the Modulator device, to control all internal
settings and to load and save precorrection’s and equalization’s curves.
With few clicks is possible to change, modify and make operative linear and no-
linear precorrection’s curves, through an intuitive graphical interface, different
tables, and optimization’s procedures.
- Installation
1. Make sure that an opportune version of Java Runtime Environment© is installed
in your computer. Assure that it is not less than 1.6.0 ( if you do not know the
actual JRE installed, simply write
java – version
in the prompt of your system).
In every case an 1.6.0 version is included in the Installation Cd provided with
the Modulator.
