Installation
900285-00 11/2014
Innovative Hearth Products
Superior
TM
DRT3000 Series Direct-Vent Gas Fireplaces
43
Figure 40: Combustible Wall Framing
Top Of
Appliance
3”
(76 mm)
This Area
Must Remain
Clear of
Combustible
Materials
1” Min.
(25 mm)
4” Clearance
Minimum
Hood
Standoff
Provides
Space From
Combustible
Materials
Stand Off
Must Be Bent
To Vertical
Position
Combustible
Finished Wall
Materials
NOTE:
See
Cold Climate Insulation on Page 10
and
Vent Termination Clearances on Page 12
.
22.
Attach the Safety-in-Operation Warning Labels
1.
Attach the furnished safety instruction labels at all fireplace operation and control points (
Page 44
).
NOTE:
The installer MUST ensure these warnings are properly attached during installation. The warning labels are a
critical means of informing consumers of safe operation practices.
23.
Installing Batteries for Backup and Wall Switch
1.
Locate the battery backup and place four (4)
AA
batteries in the backup battery holder (
Page XX
).
2.
Locate the wall switch and secure four (4)
AA
batteries in the wall switch battery holder (
Page XX
).
NOTE:
Replace batteries as a part of standard maintenance (
Page 61
) and as needed when troubleshooting (
Page
69
).
