superior fires CLARA LED INSET ELECTRIC FIRE Скачать руководство пользователя страница 8

Страница: 8 / 12

9.0 OPERATING THE APPLIANCE - CONTINUED

GB IE

2017 Focal Point Fires plc.

Remote Operation

Battery Replacement

Battery Requirements: 2x AAA 1.5V

1. Remove the battery bracket and the used batteries from the back of the remote control.

2. Insert the 2x replacement batteries the correct way into the battery holder, making sure the batteries are firmly seated.

3. Then insert the battery bracket back into position.

· The standby switch is located on the left hand side of the canopy, this must be switched on.

· Wait for the receiver to respond to the transmitter. DO NOT PRESS the buttons more than once within two seconds for correct oper-

ation.

· Flame brightness adjustment operations

· Press the DIMMER button to set the desired flame brightness, there are 5 different flame brightness levels available.

· Temperature setting operations

· Press the + button to increase to the desired temperature; press the – button to decrease to the desired temperature. The temperature

ranges from 15°C to 30°C.

· Note: The set temperature must be higher than the room temperature for the heater to operate.

· Heating operations

· Press the ON/OFF button once on the remote control to turn the fire and flame effect ON/OFF.

· Press the 1000W button for the low heat settings; press twice to switch the heat setting off .

· Press the 2000W button for the high heat settings; press twice to switch the heat setting off.

· Note: The set temperature must be higher than the room temperature for the heater to operate.

Flame brightness

Temperature

1000W/2000W

Flame brightness

Содержание CLARA LED INSET ELECTRIC FIRE












