NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
13
5. Position top right log (5) using the round protrusion on the rear log (1) and the square protrusion on the middle log (2) (
Figure 19
).
6. Position middle twig log (6) using the pin on top right log (5) (
Figure 20
).
7. Position top rear log (7) over the square protrusion and pin on the rear log (See
Figure 15 and G
).
8. Position Top Left log (8) onto the landings on the top rear log (7) (
Figure 21
) and the protrusion on the middle log (2) (
Figure 22
).
Installing the VRE3200 Series Log Set (continued)
Figure 19 - Place Top Right Log (5)
Figure 20 - Place Middle Twig Log (6)
5
6
7
8
1
1
2
2
3
3
4
4
5
Top View
Top View
Top View
Top View
Bottom View
Bottom View
Bottom View
Bottom View
1
2
3
4
5
6
1
2
3
4
5
6
7
Figure 21 - Place Top Rear Log (7)
Figure 22 - Place Top Left Log (8)
Landing for Log 8
Protrusion
for Log 8
Cut-out fits over
protrusion on Log 1
Notch fits over
pin on Log 1
Cut-out fits over
protrusion on Log 1
(See Figure 15)
Cut-out fits over
protrusion on Log 2
(See Figure 16)
Pin for Log 6
Fits ove Pin on Log 5
(see Figure 19)
Cut-out fits over
protrusion on Log 2
(see Figure 16)
