Superior Fireplaces Pro Series Скачать руководство пользователя

Страница: 1 / 24

INSTALLATION AND OPERATION INSTRUCTIONS
Superior

Pro Series Wood-Burning Fireplaces

MODELS

P/N 126619-01 Rev. K 02/2019

REPORT NO. 10-078

P126619 01

PFS

WRT3036WS
WRT3036WSI
WRT3036WH

WCT3036WS
WCT3036WSI
WCT3036WH

SAVE THIS BOOK

This book is valuable. In addition to instructing you on how to install and maintain your appliance, it also

contains information that will enable you to obtain replacement parts or accessory items when needed. Keep

it with your other important papers.

INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.

Installateur : Laissez cette notice avec l’appareil.
Consommateur : Conservez cette notice pour consultation ultérieure.

This wood burning fireplace complies with UL127

CAN/ULC-S610-M87 standard as a FACTORY

BUILT FIREPLACE.

Ce foyer au bois est conforme aux UL 127 CAN/ULC-

S610-M87 norme comme une USINE CONSTRUITE

CHEMINÉE.

This fireplace is approved for use as a wood burning fireplace or for use with a vented gas log approved to

ANSI Z21.60 or Z21.84 standards or for use with a vent-free gas log heater approved to ANSI Z21.11.2 standard

An IHP hood must be installed when using a vent-free log heater (see Accessories, page 20).
FOR CANADA: The authority having jurisdiction

(such as the municipal building department, fire

department, etc.) should be contacted before

installation to determine the need to obtain a permit.

POUR LE CANADA: L’autorité compétente (comme le

service municipal du bâtiment, les pompiers, etc.) doit

être contacté avant l’installation afin de déterminer la

nécessité d’obtenir un permis.

This appliance may be installed in an aftermarket permanently located, manufactured home (USA only) or

mobile home, where not prohibited by local codes.

This installation manual will enable you to obtain a safe, efficient and dependable installation of your fireplace

system. Please read and understand these instructions before beginning your installation.

Do not alter or modify the fireplace or its components under any circumstances. Any modification or alteration of

the fireplace system, including but not limited to the fireplace, chimney components and accessories, may void the

warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation.

IMPORTANT! TO ASSURE PROPER ALIGNMENT OF GLASS DOORS: INSTALL THIS FIREPLACE IN A SQUARE

AND PLUMB CONDITION, USING SHIMS AS NECESSARY AT SIDES AND/OR BOTTOM.

Ce manuel est disponible en francais, simplement

en faire la demande. Numéro de la pièce 126619-02.

NOTE: DIAGRAMS AND ILLUSTRATIONS THROUGHOUT THE MANUAL ARE NOT TO SCALE.

Содержание Pro Series

























Результаты поиска

Содержание Pro Series

Отзывы:

Похожие инструкции для Pro Series

Бренды по названию

Популярные бренды

Superior Fireplaces Pro Series, Инструкции по сборке, установке и эксплуатации

Результаты поиска

Содержание Pro Series

Отзывы:

Похожие инструкции для Pro Series

Бренды по названию

Популярные бренды