Introduction
1
1.0 INTRODUCTION
1.1 Using This Manual
It is important that you understand how TD330 units operate before installing and using these products. We
strongly recommend that you read this manual completely before proceeding with the installation.
This manual is an installation and operating guide for the TD330/04 and the TD330/08 Torque Mode
Amplifiers (Drives). Section 1 gives you an overview of the product functions and features. Section 2 gives
detailed information on the specifications for the product and pertinent system requirements. Section 3
provides the recommended installation guidelines. Section 4 contains the recommended operating
instructions for the system.
Other information included is a troubleshooting guide in Section 5, and warranty information.
1.2 Product Features
The TD330 drives are designed to operate hall commutation DC brushless motors. Alternatively, motors
with encoders having the appropriate commutation signals may be used. The amplifier operates in the torque
mode which can be connected to a positioning system such as the Superior SLO-SYN MX2000 control. A
version with a built-in single-axis controller is also available as the TDC330/04 and the TDC 330/08.
*
Line operated 115/230 Vac input
*
Switch selectable current scaling for easy installation (no potentiometers to adjust)
*
Latched short circuit protection (phase to phase and phase to ground)
*
Latched over temperature protection
*
Latched DC bus over voltage protection
*
Optically isolated inputs
*
50 ohm 50 watt regenerative energy circuit included
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
