4. Installation
The Vehicle Unit will only operate on 12 V systems with negative earth
(Negative to body).
o
Before starting installation, disconnect the vehicle battery and
observe other manufacturers safety instructions regarding
alarm systems, airbags or anti theft radio coding.
o
If you want to install the Vehicle Unit in the passenger
compartment, make sure that all antenna cables and wiring is
protected from sharp edges and is routed in such a manner that
it will not be pinched.
o
The device comes with built-in GPS antenna. It shall be
mounted vertically with its top facing the sky. The ideal
location is under the dashboard, close to the windscreen. The
device will not work if it is placed beneath metal or metallic
glass coatings.
o
The SOS button should be installed at a place on the dashboard.
It should be hidden but easily accessed in emergency cases. It
should be placed separate from dashboard controls and car
audio devices.
o
Do not connect the spare battery to the Vehicle Unit before you
have completed all electrical wiring and connections to the
device.
8
NOTE:
Please note that installation methods may
vary between vehicle models. For expert wiring
and connecting please contact a professional car
electronics workshop for installation support and
maintenance.
Connecting The Vehicle Unit:
When connecting, refer to the cable description and wiring diagrams
on the following pages.
9
NOTE: Finish all wiring and connections to the
correct vehicle outputs and inputs before you apply
the connector to the Vehicle Unit !
