2. Precautions
Note to Users
Part feeder is a heavy weight machine, so that movement, setting up and installation,
must be done by equipment in order to avoid injury.
Control system consists of different type of controllers and devices. Adjustment and
maintenance must be preceded in accordance to the manual of each controller.
Feeder manufacturer is not responsible for any machine trouble or human injury
caused by the parts feeder after being modified or additionally processed by a third
party other than the manufacturer after delivery.
Specifications and contents of this manual are subject to change without any
obligation part of the manufacturer.
DANGER:
Electric shock!!
Turn OFF primary power source, before any wiring and maintenance.
DANGER:
Electric shock!! Connect the grounding wire (green/yellow) before
setting up.
Caution:
Never make short circuit between input and output wire.
Caution:
Be sure to make wiring for AC115V/AC230V
Single phase (
Brown
and
blue
wire for power,
green
/
yellow
for
grounding)
www.fujicon.com.sg
4