7. Preparation
7-1.
Turn OFF all the power.
7-2.
Dismount the front panel by unscrewing the mounting/dismounting screw in
the anti-clockwise direction.
7-3.
Connect cable of feeder to controller.
Connect to output cable of the controller to the feeder input cable. Be
particularly aware of live, neutral and earth connection respectively.
7-4.
Connect power cable to controller.
Terminal AC power supply according to the selected AC voltage (230Vac or
115Vac) to get ready.
7-5.
Connect fuse in the fuse holder.
Insert the fuse properly in the fuse holder in which both side of the fuse must
be in contact with the fuse holder.
7-6.
Select SW4 for 3 kHz or 6 kHz frequency selection.
Choose 6 kHz for full-wave frequency or 3 kHz for half-wave frequency.
7-7.
Check input and output cables for grounding with multimeter to ensure safety.
7-8.
Check and tighten all incoming and outgoing cables termination.
7-9.
Mount the front panel by screwing the mounting/dismounting screw in the
clock-wise direction.
www.fujicon.com.sg
10