If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
6
. Locate the Water Pump (image a) and attach the supplied 1/2” fitting to the
top of the water pump. Place the Water Pump in the SuperPonics
reservoir near end with the channel. Arrange the power cord of the Water
Pump into the middle channel located on the rim of the reservoir (image b).
7
. Locate the reservoir lid. On the under side of the lid, locate the open end
of the black tubing (image c). Attach the open end of the tubing to the
open connector on the top of the Water Pump (image d). Return the lid to
the reservoir.
8
. Insert the Net Cups into the openings of the top of the reservoir. Once in
place, arrange the top feed hoses to the center of the net cups
9
. Place the SuperPonics system and Air Pump inside the flower chamber of
the cabinet. Run the Water Pump and Air Pump power cords through the
lower opening in the back of the cabinet.
Read the instructions for the water pump, as they
contain valuable information on how to maintain this
component. THIS PUMP SHOULD NEVER RUN WHEN
NOT FULLY SUBMERGED IN WATER.
SuperPonic 16 System Assembly
NOTE:
The SuperPonics 16 includes an automatic drainage tube
to empty the reservoir. This tube stays in the reservoir
until you need to drain. To drain the reservoir place the
open end of the tube in a receptacle and open the valve
by turning it parallel to the drainage tube (image e).
Finally turn on the water pump on to drain the reservoir.
The valve should ALWAYS be in the closed position
unless draining the reservoir.
NOTE:
OPEN
CLOSED
a
b
c
d
e
