If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
1.
Unpack KIND LED Grow Light (image a).
2.
Locate your the Wire Hangers (image b).
3.
Connect the wire hangers to each of the metal hangers on the light
(image c).
We have set the light on a convenient Yo-Yo system so the height can
be adjusted as your plants grow. To lower the light, simply press the
button located on the side of the Yo-Yo and adjust to the desired height.
To raise the light pull upward on the end of the Yo-Yo cord.
4.
Place the Kind LED Light in the bottom of the cabinet. Lower the Yo-Yo
system until you can connect the Yo-Yo carabiners to the center of the
Wire Hangers (image d). Raise the light to the desired height.
5.
Run the power cord from the LED light through the nearest Elbow
opening to the back of the cabinet.
Hanging your LED Light
a
b
c
d
