Superabrasive Lavina V32G-X, Руководство пользователя

Страница: 26 / 48

Superabrasive
Owner’s Manual Original Language – Lavina
®
V32G-X/GTX 14/2019
26
6.3 TENSIONING AND REPLACING THE BELTS
Unscrew the four screws of the right servicing cover and remouve it (pos.1,2;fig.6.5).
Loosen the four bolts (pos.4;fig.6.5), and use the bolt (pos.3;fig.6.5) to tighten the belts.
The belt tension can be tested with an OPTIKRIK I (fig.6.7).
Тhe tension of the existing belt must be 320 N. The tension of the new belt must be 415N (fig.6.7).
6.4 DISMOUNTING/MOUNTING THE ENGINE
Unscrew the four screws of the right servicing cover and remouve it (pos.1,2;fig.6.5).
Unscrew the four bolts (pos.4; fig.6.5) and the tightening bolt (pos.3;fig.6.5).
Push the motor (pos.5; fig.6.5) towards the HEPA filter box and dismount the two belts.
Dismount the throttle kit of the motor
Pull straight up the motor together with the motor base plate
Figure 6.6
Figure 6.7
Figure 6.5