Superabrasive
Owner’s Manual Original Language – Lavina
®
V25-X
06/2018
3
1. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina
®
V25-X dust collector, the servicing technician as well as
for anyone involved with the operating or servicing the machine. We recommend that you read the instructions very
carefully and follow them strictly. The manual includes information about assembling, using, handling, adjusting and
maintaining your Lavina
®
V25-X concrete dust collector.
MANUFACTURER
Superabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the stone and
concrete industry. Today, Superabrasive is one of the world’s leading companies in the production of diamond tools and
floor grinding machinery. At Superabrasive, we strive to deliver the very best solutions to our customers, and enable
them to work more efficiently.
GENERAL DESCRIPTION
Lavina® V25-X dust collector is designed for sucking and separating dry, non-combustible and non-explosion
dust. Dust laden air is sucked through at high speed via the suction hose. The air is slowed down by the cyclone and
coarse dust particles are separated out, partly by centrifugal force and partly by gravity. Air and finer particles then pass
through filter system from the primary filter and the HEPA filter where the dust is separated. The machine is designed to
clean the primary filter by impulse reverse air flow. The vacuum has automatic cleaning system of the main filter on
adjustable period. The separated dust accumulates in the cyclone until the machine is switched off, when it drops
through the bottom flap into the plastic bag.
Lavina® V25-X dust collector has two hoses:
-Main hose with Cam Lock to connect to the grinding and polishing machine
-Accessory hose with Cam Lock for the wand
WARNING!
The Lavina
®
V25-X machine is manufactured and fitted for the above-mentioned applications only! Every other use may
possess risks to the persons involved.
2.MAIN COMPONENTS AND CONTROLS
1) Motor head assembly
2) Control board
3) Vacuum gauge
4) Latches (4 total)
5) Filter chamber
6) Vacuum handle
7) Zip tie holder
8)
LONGOPAC® waste system
9) Caster wheel (2 total: 1 locking)
10) Fixed wheel (2 total)
11) Trolley frame
12) Main vacuum hose Cam Lock
inlet
13) Motor head handle
14) Suction pipe coupling point
15) Handle for Filter Cleaning
System
16) Control board coupling to main
head
17) Lighted Power switches
18) Filter cleaning push button
19) Potentiometer to adjust the
cleaning cycle of the main filter
20) Accessory hose with Cam Lock
Figure 1.1
