Superabrasive LAVINA V20-X, Руководство пользователя

Страница: 10 / 28

Superabrasive
Owner’s Manual Original Language – Lavina
®
V20-X 08/2018
10
5.6
INSTALLING LONGOPAC® REFILL PACKS
When the plastic bag cartridge has reached its end, the plastic bag refill may be installed using the following
procedures:
• Locate the 2 retaining levers located underneath the Longopac® bag support ring (Fig 5.7).
• First pull down on the retaining levers, then rotate them 90 degrees such that the ends are pointing towards the center
of the machine (Fig 5.8. Fig 5.9).
• Pull down on the bag support ring to remove it, and place aside on a level surface.
• Place the Longopac® bag refill into the support ring. Ensure that the 2 ends of the refill are directed in an upwards
position. Pull the inner end of bag refill down over the inside surface of the bag support ring (Fig 5.10).
• Lift the bag support ring into place so that the bottom is located above the bottom edge of the hopper container (Fig
5.11).
• Rotate the 2 retaining levers backwards so that the ends are pointing outward and holding the bag support ring in
place.
• Pull the outer edge of the bag down over the support ring until a zip tie, or cable tie, can be installed all the way
around the bag.
• After the zip tie has been securely installed, pull the bag down until the end reaches the lower, bag-support plate. The
vacuum cleaner is now ready for operation.
Figure 5.10
Figure 5.11
Figure 5.7 Figure 5.8 Figure 5.9