Superabrasive
Owner’s manual original language – Lavina
®
LP36GE
1/2022
32
10.3 CHECK AND REPLACE EVERY 100 WORKING HOURS
Change engine oil, while changing check for leakage of engine oil at the various seals. The hour meter will
blink between 48-52 hours as a reminder/"Engine Oil Capacity" is 1.6 L (1.7 U.S. qt.) when oil filter is not removed and
1.9L (2.0 U.S. qt.) when oil filter is removed.
10.4 RECOMMENDED OIL CHANGE INTERVALS
Do not exceed the 100-hour oil change interval. Oil changes more frequent than 50 hours will give even
longer engine life. In any case, always use 30HD or 10W-30 engine oil with all of the following ratings: SF, SG, and CC.
make sure the oil level is maintained at the "FULL" level.
Table 8.4
IMPORTANT: You can find more specific information about maintaining the engine by downloading it’s manual
at
https://kohlerpower.com/en/engines/product/command-pro-efi-propane-pcv740
OPERATION
INTERVAL
Daily
First
8
Hrs.
Every 50
Hrs.
Every 100
Hrs.
Every 200
Hrs.
Every
300Hrs.
Every
400Hrs.
Every 500Hrs.
Check & add engine oil
X
Check for loose or lost fasteners
X
Check for oil leakage
X
Inspect fuel hose and connections
X
Clean engine dust filter
X
Inspect throttle & wire
X
Change engine oil
X
Change engine oil filter
X
Check & clean primary air filter
X
Check secondary air filter
X
Inspect battery and battery
connections
X
Replace engine primary air filter
X
Replace engine pre filter
X
Inspect, clean & re-gap spark plugs,
Replace if necessary
X
Check & adjust valve clearance *
Re-torque heads *
X
Clean & lap valve seating surface *
X
Check engine emissions
X
* Return machine to authorized service center for overall checkup of the Engine. For Propane safety, have
the machine serviced by a Certified Technician, including emission check.
