Superabrasive LAVINA ELITE 3213EHV, Руководство пользователя

Страница: 8 / 42

Superabrasive
Owner’s Manual Original Language – Lavina
®
3213E/3213EHV 2/2020
8
Always wear safety gloves when changing the tools. Always wear clothes suitable for the work environment.
OPERATOR
The operator
Lavina
®
32E machine
must have an adequate
technical knowledge and preparation.
The operator must know the machine’s work environment.
Only one operator at a time can work with the machine.
The operator must be properly trained and well instructed
prior operating the machine.
The operator must understand all the instructions in this
manual.
The operator must understand and interpret all the
drawings and designs in manual.
The operator must know all sanitation and safety
regulations pertaining to the operation of
The operator must have floor grinding experience.
The operator must know what to do in case of emergency.
3. HANDLING AND TRANSPORTATION
3.1 POSITIONING THE HANDLE
By loosening the swivel bolt (Fig. 3.1-2), one can turn
the steering bracket (Fig. 3.1-3) to a new position. To
turn the steering bracket down (Fig. 3.3) you have to
loosen the swivel bolt (Fig. 3.1-2) and push it in, for
security reasons.
To change the handle positions pull the knob (Fig. 3.1-1, Fig. 3.4), and move the
handle up or down.
By loosening the swivel bolt (Fig. 3.1-2), one can turn the steering
bracket (Fig. 3.1-3) to a new position. To turn the steering bracket down
(Fig. 3.3), loosen the swivel bolt (Fig. 3.1-2) and push it in,
for security reasons.
3.2 USING THE STEERING BRACKET
The handle can be positioned in in three
different
positions:
Transport position to store or to
transport or to hoist the machine (fig.
3.2)
Working position (fig. 3.3) and Flipping
position (fig. 3.4)
3.3 FLIPPING THE MACHINE UP
To change the tools, put the handle in the flipping (upright) position (Fig. 3.6), grab the steering bracket and pull the
machine down using all bodyweight (one foot on the control box can help). Put the bracket down on the floor (Fig. 3.7)
and change tools.
One foot on the
control box can help
again while putting
the machine back.
Figure 3.1
Figure
8.3.6
Figure 3.3
Figure 3.2
Figure 3.4
Figure 3.5