Superabrasive LAVINA ELITE 3213EHV, Руководство пользователя

Страница: 13 / 42

Superabrasive
Owner’s Manual Original Language – Lavina
®
3213E/3213EHV 2/2020
13
4.5 CONTROL BOARD
1 Emergency button used to stop the motor in
case of emergency
2 STOP button which stops the motor .
3 RUN button.
Start the motor (ready ON/OFF switch
must be ON).
4 READY led lights green when the power is on
5 Water pump switch. Glows
in orange when the
water pump is working.
6 HIGH VOLTAGE marking / When it is present the
machine is for high voltage power supply/
7 LED lights switch
.
8 QR code. When you scan it with your phone for
example, it will redirect your browser to Lavina
manuals page.
9 READY ON / OFF switch.
The switch
returns to its starting position after being
released.
If you want to start the motor it must be ON
as it puts the inventor into standby mode (it
glows
when it’s turned ON). If it’s off the inventor
will be out of standby mode and you cannot
start the motor.
10 Cup holder.
11 Potentiometer
controls the RPM of the
grinding plates on a range of
4
00-
65
0
12 Digital Tachometer indicates the
revolution per minute of the grinding plates
(not the revolution per minute of the entire
unit).
13 Phone holder
14 Reset button
resets the alarm
of the inverter
15 Inverter alarm led Lights blue when
the inverter goes into alarm mode
16 USB charger
Figure 4.9