Superabrasive Lavina 32 Pro, Руководство пользователя

Страница: 7 / 36

Superabrasive Owner’s Manual Original Language – Lavina 32
®
Pro /32
®
HV Pro 2/2014
7
FLIPPING THE MACHINE UP
To change the tools put the handle in the flipping (upright) position (Fig. 3.11), grab the steering bracket and pull the
machine with all your bodyweight down (one foot on the control box can help) Put the bracket down on the floor (Fig.
3.12) and change tools. While putting the machine down a foot on the control box helps again.
SPLITTING THE CARRIAGE FROM THE MAINHEAD
Unplug the motor cable plug from the control box (Fig. 3.13) and disconnect
the water hose from the main head by pulling it out (Fig. 3.14).
Release the pin sets (Fig. 3.15) which holds the weight/3rd wheel frame to the
carriage and remove the frame (Fig. 3.16).
Unscrew the bolts (Fig. 3.17), pull the bolts out (Fig. 3.18), and divide the
carriage from the main head (Fig. 3.19).
LIFTING
Lifting the machine by crane is possible by using the hoisting ring mounted on the carriage
(see fig. 3.20). The eye bolt and machine construction is rated only for the weight of the
machine. Do not lift any other loads on the machine. Use always hoisting equipment rated
for 450 kg or 1000 lbs. See to it the security pin (Fig. 3.9, Fig. 3.10) is mounted.
Figure 3.20
Figure 3.14
Figure 3.13
Figure 3.15
Figure 3.19
Figure 3.16
Figure 3.18
Figure 3.17