Superabrasive Lavina 25LM-X, Руководство пользователя

Страница: 28 / 41

Superabrasive User Manual Original Language Lavina® 25LM-X / Lavina® 25LM-X-HV 1/2016
8.10 REPLACING THE PLANETARY UNIT
Unscrew the six bolts (Fig.8.10.1)(Fig.8.10.2) and press down the planetary unit.
When mounting back secure with sealant (fig.8.10.3).
8.11 REPLACING PARTS FROM THE DRIVING OF THE CARRIAGE
Lift the lorry so both wheels are on the air. Unscrew the four bolts (Fig. 8.11-1) and take the bearing of the wheel (Fig.8.11-2).
From this position you can replace the loose key(Fig. 8.11-3) or the
sealing V ring (Fig.8.11-4) without dismounting other parts. If a
replacement of the half clutch is necessary (Fig. 8.10-5) unscrew the
four bolts (Fig. 8.11- 6). During reassembly you have to assure the
coaxiality of the wheel bearing against the hole of the half clutch (Fig.
8.11-5). Tighten the four bolts by hand (Fig. 8.11-1) and roll the bearing,
so there is no increase or reduce of resistance on rolling. (Plug the lorry
into the power supply, put
switch SLOPE in pos. ON and tighten the
four bolts (Fig. 8.11-1) tightening torque - 45N.m
.
(this way the parts of
the electromagnetic clutch will take working position). After release of
the electromagnetic clutches (put
switch SLOPE in position OFF and
activatе the button
STOP the bearing should scroll easy, without
tangible resistance by hand. To replace the whole driving unit (Fig. 8.11-
7) or engine (Fig. 8.11- 9) unscrew the bolts (Fig. 8.11- 8). During
reassembly you have to assure the coaxiality between the driving unit
and the bearing of the two wheels.
8.12 MOTOR CONNECTION
In case the motor is being replaced, please follow the cable connections in the figures below (Fig.8.12.1 and Fig.8.12.2).
Lavina® 25LM- X
The motor is connected in “Delta”
(Triangle) 230 Volt, reminder for
the wire connection of the motor.
Lavina® 25LM-X-HV
The motor is connected in “Star”
380 Volt, reminder for the wire connection of the motor.
Figure 8.10.3
Figure 8.10.2 Figure 8.10.1
Figure 8.12.1
28