Superabrasive
Owner’s Manual Original Language LAVINA® 16 Pro
1/2012
4
ENVIRONMENTAL CONDITIONS
The temperature range for operating the Lavina 16® Pro outdoors is between 41°F and 86°F or 5°C and 30°C. Never
use the Lavina 16® Pro during rain or snow when working outdoors. When working indoors, always operate the
machine in well-ventilated areas.
ELECTRICAL CONNECTION
The voltage (Volt) and power (Ampere) are displayed on a label on the electrical control box to avoid any incorrect
connection. Refer to these before connecting the power. To avoid electrical shocks, make sure the ground power
supply is functioning properly.
VACUUM CONNECTION
A connection for a vacuum dust extractor is located on the carriage. The Lavina 16® Pro does not include a vacuum
dust extractor. The customer must purchase the vacuum dust extractor separately. The hose of the vacuum extractor
must be Ø 50 mm and can be glided over the pipe. The vacuum dust extractor must be adapted for floor grinders and
have a minimum air displacement of 320m3/h with a negative vacuum of 21 kPa.
TECHNICAL DATA
VIBRATIONS
The vibrations of the machine are within the limits of directive 2003/10/EC (the seventeenth Individual Directive of
Article 16(1) of Directive 89/391/EC) if the Lavina 16® Pro is operated with the recommended tools and in normal
conditions.
SONOROUS EMISSIONS
Sonorous emissions are also within the limits of directive 2003/10/EC (the seventeenth individual Directive of Article
16(1) of Directive 89/391/EC). However, as previously stated, the operator must wear ear protectors.
LABEL DATA
The data on the label provides the correct voltage and kW (needed for operational purposes);
Weight (needed for transportation purposes); production year and serial number (needed for maintenance purposes).
CUSTOMER SERVICE
For customer assistance and technical support call your local distributor or call Superabrasive Inc. at
1-800-987-8403 or visit us at:
www.superabrasive.com
, where you can download a copy of this manual.
2. SAFETY INSTRUCTIONS
RECOMMENDED USE
The Lavina 16 Pro machine is designed and manufactured to
grind and polish concrete, terrazzo and natural stone floors. It
can be used for renovations as well as for polishing. The
machine is designed for dry or wet use. When using it dry, use a
vacuum of appropriate size. For more information, please refer
to the chapter on handling the vacuum connection.
PROHIBITED USE
The machine MUST NOT be used:
•
For applications different from the ones stated in the
General Description chapter.
Lavina 16® Pro
Voltage/Hz
1 ph x 208-240 V 50/60Hz
Amperage
Max 12 Amps
Power
2,2 kW
3 hp
Tool holder rpm
300-1100 rpm
Working width
414 mm
16”
Tool holder diameter
3 x 165 mm
3 x 6.5”
Tool diameter
3 x 175 mm
3 x 7”
Weight
92 kg
203 lbs
Grinding pressure
55 kg
121 lbs
Additional weight
max 1x10 kg
22 lbs
Application
wet and dry
Vacuum hose port
yes
Water tank capacity
10,5 l
2.8 gal
Water feed
Peripheral
Cable length
17.4 m
57 ft
Machine LxWxH
1160x430x1070 mm
45.7”x16.9” x42”
Packing LxWxH
1150x730x1155 mm
45.2”x28.7”x45.5”