Superabrasive
Owner’s Manual Original Language LAVINA® 16 Pro
1/2012
21
Pull the water hose from the tank
(Fig. 8.11)
Pull out the socket from the motor cable
to the carriage. (Fig. 8.13)
Separate the carriage from the main
head. Dismount the machine support
Dismount the guard assembly. (Fig.
8.14)
Unscrew the top cover and
remove the top cover by pulling it
over the motor. (Fig. 8.15)
Mount back the machine support as this
will make it easier to turn over the main
head. (Fig. 8.16)
REPLACEMENT OF THE PULLEY UNITS
Set the bottom cover assembly aside (Fig.8.21) Remove the belt by turning the pulleys by hand, while pushing the belt
off. (Fig.22) Turn the units to ensure that the bearings are working properly. (Fig. 8.23) Units, whose bearings are worn
out or do not turn with ease should be replaced.
First, unscrew the nut, which is holding the pulley unit (Fig.8.24, Fig.8.25) When released, pull out the whole unit.
Carefully pull out the unit with crowbars, but do not use excessive force.
Figure 8.21
Figure 8.19
Figure 8.18
Figure 8.20
Figure 8.22
Figure 8.23
Figure 8.12
Figure 8.11
Figure 8.15
Figure 8.16
Figure 8.14
Figure 8.13
Figure 8.24
Figure 8.25