Supera SSUD18-1, Инструкция по эксплуатации

Страница: 9 / 15

INS
TRUCTION
MANU
AL
©SUPERA
V.1.0 |
October
2014
©SUPERA
V.1.0 |
October
2014
SETTING AND CHANGING MODES
A. SWITCH
A1. POWER S/W
To turn on/off electric power on main board.
If power is on, the ready lamp will be flickering, and it will display the whole
washing time (wash, stand by, rinse) by digits.
A2. READY S/W
To prepare for operation, set time, wash, rinse, chemical agent supply, delayed
time and temp, etc. and to lock system
a. To prepare for the operation system if press ready, ready flickering
and then press again ready lamp on; all preoperational courses (water
supply, chemical agent supply, heating, etc.) to be ready.
b. To set and change modes; wash time, rinse time, chemical agent
supply time, wash temp, rinse temp, delayed time, initial
detergent supply time, etc. When changing the existing modes,
press ready button with functional sw 1,2,3 in three holes as
shown below.
c. To lock washing system temporarily, press ready and close the door.
To unlock washing system press ready again.
B. HOW TO CHANGE AND SET MODE
1. Power ON
2. Press MODE button (adjustment for step) Wash Time – Rinse Time –
Booster Temp. –
Detergent Supply Time – Delay Time – Wash Tank Temp – Initial Detergent
Supply Time
3. Change step by MODE bottom (digit flickering, then adjust by UP/DOWN)
4. Change next step by pressing MODE button
5. Press READY when setting is finished
EX) Wash time 50sec to 60sec/rinse time 8sec to 9sec
1. Power ON
2. Press MODE (wash time shows 50 sec)
3. Press UP (50 sec, flickering)