Supera SSUD18-1, Инструкция по эксплуатации

Страница: 10 / 15

INS
TRUCTION
MANU
AL
©SUPERA V.1.0 |
October
2014
4. Press UP again (50 is changed to 60, and flickering)
5. Press MODE (rinse time shows 8sec)
6. Press UP (8 is changed to 9, and flickering)
7. Press READY (setting finished and stand-by)
C. LAMP DISPLAY
1. WATER LAMP ON/OFF
ON: to supply water to wash & booster tank
OFF: to finish watering tank
2. STAND BY LAMP ON/OFF
ON: to be ready to start the system
3. WASH LAMP ON/OFF
ON: to wash dishes by system
4. RINSE LAMP ON/OFF
ON: to rinse dishes by system
5. DETERGENT LAMP ON/OFF
ON: to supply detergent to tank while washing
6. RINSE AID LAMP ON/OFF
ON: to supply rinse aid to tank while rinsing
OPERATION
1. Place drain pipe and strainer in the right place
2. Turn on the main switch
3. Controller

Check the flickering light after pushing the ready button