-4-
3. WARNINGS IN OPERATION
1.
Place the machine in a horizontal position and on a sturdy-resting place. Fix the
piping stability to avoid the damage.
2.
Before repair, read this manual carefully to realize every parts and operating
schedule.
3.
Different chemical solutions mixed together will cause reaction and even heat to
damage the machine. Don’t apply different chemical solutions with the same
machine. If needed, Contact with our technician.
4.
Any misuse of this equipment such as modifying parts, pumping incompatible
chemicals and fluids, using worn or damaged parts is not recommended.
Following the safety instructions.
5.
Most of the electronic-plating liquids contain hydrogen. It is released during
electrolysis, and it will remain in the barrel. If the filter hasn’t been used in a long
time, pressure will build inside the barrel and may cause an explosion. Gaseous
chemical element should be let out through the air drain valve. If the filter is not
to be used for a long time, the air drain valve should be kept open to prevent a
build-up of volatile fumes.
6.
The flow rate should be checked periodically that to make sure it is normal. Clean
the medium on a schedule. When the pump dry-runs for a long time, the liquid in
the pump will be very hot and vaporize. Pressure inside the barrel will build up
and can potentially explode. Never forget to double-check the inlet to make sure it
is open before operating. Dry running will damage the pump and filter.
7.
Please operate the filter only during working hours. Unplug the machine when it
is not operating. To prevent the filter from dry-running, never have the machine
on without an operator.
8.
Don’t place the filter outdoors. The sunlight will weaken the barrel material.
9.
The working pressure should not be higher than 3 kg/cm
2
and the liquid
temperature should be lower than 70
℃
.
Содержание FKH
Страница 7: ......
