Installation for IGP231/IGS54
Galaxy LED Pool & Spa Lamps
NOTE:
Galaxy LED Lamp fits most 12VAC and 120VAC wedge-based lighting
sockets. Galaxy LED Lamp are not for use with spas that have dimming systems or
electronic controllers.
STEP 1
Access the old lamp according to your spa
manufacturer’s instructions. Remove the locking
ring. (Fig. 1)
STEP 2
Remove the existing lamp. (Fig. 2),
WARNING:
Always install a new lens gasket
whenever disassembling the light. Failure to do so
may permit water to leak into the assembly,
which could cause: an electrical hazard resulting in
death or serious injury to pool and spa users,
installers or others due to electrical
shock; or breakage of the lamp or lens
which could result in serious injury to
pool and spa users,
installers,
bystanders, or in property damage.
STEP 3
Replace the existing gasket with a new
one. (Fig. 3)
STEP 4
Screw in the Galaxy
LED Lamp into the
socket.
(Fig. 4A, 4B)
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4A)
(Fig. 4B)
